Can a Dress Be Taken in a Size
Download Article
Download Article
Sometimes you find the perfect dress but it's just not quite the right size. The great news is that you don't have to put it back on the rack! There are a few simple ways you can tailor a dress to make it a few sizes bigger or a few sizes smaller. We've answered some of your questions so you can make your dress fit your body perfectly.
-
1
Pin the dress so it fits your body. Put your dress on and hold it tightly against your body (as tight as you want it to fit at the end of your tailoring). Use sewing pins to hold the fabric in place, going from the arm hole down to the bottom hem on each side of the dress. When you're done, carefully take the dress off without disturbing the pins.[2]
-
2
Flip the dress inside out, then mark the inside. Turn the dress inside out so you can see the seams. Grab a marker and draw a straight line down both sides of the dress following the sewing pins. When you've drawn your line, you can take the pins out.[3]
-
3
Sew a straight stitch down both side seams of the dress. Take your dress over to your sewing machine and load it with thread that matches your dress color. Use a straight stitch to sew down the lines you made on the inside of your dress. When you're done, flip your dress right side out and try on your new snug garment! If the side seams are too bulky, use scissors to cut off the excess fabric from the inside of the dress.[4]
- Some dresses, like formal ones, should be opened at the seams in order to take them in with a nice finish.
Advertisement
-
1
Pin your dress to see how much you need to take in. Put your dress on and pinch the waist on both sides to see how much you want to take in. Use safety pins to hold the fabric in place while you carefully take the dress off.[5]
- If you only want to take the dress in temporarily, you can pin it and just make some small stitches by hand.
-
2
Draw a triangle shape on the inside of the waist. Turn your dress inside out and draw a triangular shape on both sides of the waist with the point facing downwards. This triangle shape is called a dart, and it will help pinch the fabric in to take in the dress.[6]
-
3
Sew 2 darts on either side of the dress. With the dress still turned inside out, fold the triangle over itself so the edges line up. Pin the edges down, then sew along the lines using a straight stitch. Do this on both sides of your waist to take them in.[7]
Advertisement
-
1
Rip the seams on the side of the dress. Figure out where the dress is tight on you (usually it's the waist or the bust). Grab your seam ripper and rip out the section that's tight on either side of the dress.[8]
-
2
Cut out a triangular piece of fabric to fit each side. Spread your dress out flat and hold the seams apart from each other as far as they'll go. Grab a piece of fabric that matches the color of your dress, then cut out a triangular section that lines up with the opening in the seams. Add about 1 in (2.5 cm) around the entire triangle for a seam allowance as you cut.[9]
-
3
Sew the new fabric into the seams. Turn the dress inside out and line the triangle up with the ripped seams. Use sewing pins to attach the triangle in place, then sew it down using a zig zag stitch. Turn your dress right side out before you put it on![10]
Advertisement
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Thanks for submitting a tip for review!
About This Article
Thanks to all authors for creating a page that has been read 23,355 times.
Did this article help you?
Source: https://www.wikihow.com/Tailor-a-Dress
0 Response to "Can a Dress Be Taken in a Size"
Post a Comment